MPEG LA 16CH Instrukcja Użytkownika Pobierz pdf (Strona 15)

ADVANCED OPERATION

X axis 0 ~ 24 hours. Each time interval within a square is two hours (divided into four 30-minutes).

Y axis Monday ~ Sunday.

Operation Move to the start time point, and press enter to set the start time point (marked in red color). Then,

press “UP”, “DOWN”, “LEFT”, “RIGHT” button to set the timer-recording schedule. After setup,

press enter button again to create an ending time point (marked in yellow color) and press “MENU”

button to exit.

Note: This function here is only for detection timer setup and activation.

5.4. DETECTION

In this submenu, you can set up detection-related functions.

Move to “DETECTION”, and press ”ENTER”. The screen will show the following submenu items:

1) TITLE

Show the camera title of each channel set in “CAMERA”.

2) DET

The available options vary depending on the model you have.

For Model 1 & 2: Select if you want to activate the motion detection function for the selected channel (ON/OFF).

For Model 3 & 4: Select HIGH / NORMAL / LOW to activate the motion detection function with different sensitivity

for the selected channel, or select OFF to disable this function.

3) AREA

Press “ENTER” button to set the detection area. You will see similar screens as the following:

Pink blocks represent the area that is not being detected while the transparent blocks are the area under

detection.

There are two different methods to set the detection area depending on the model you have.

Method 1

Transparent blocks are the area under

detection.

Press “ENTER” to confirm the start area. Press “LEFT” / “RIGHT” to choose the

width of the detection area.

Press “UP” / “DOWN” to choose the height

of the area.

You can also set up multi-detection area. When any movement is detected, you will

see the grids are flashing.

*Pink blocks represent the area that is not being detected while the transparent blocks are the area under detection.

Method 2

*Pink blocks represent the area that is not being detected while the transparent blocks are the area under detection.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 33 34

Brak uwag

MPEG LA 16CH Instrukcja Użytkownika Strona 15